DYLON Wash & Dye Instructions with Safety Information

DIRECTIONS

1. Wearing rubber gloves, empty Wash & Dye powder into washing machine drum & add dry fabric
2. Immediately run 40°C cotton cycle without pre-wash or economy setting
3. Add normal washing detergent and run 40°C cotton cycle to remove excess dye from fabric and to clean the machine to clean the machine
4. Dry fabric as normal, away from direct sunlight & heat

COLOUR SHADE

The shade will depend on 3 things:
1. FABRIC TYPE:

• Cotton, linen, viscose, will dye to the full shade
• Polyester/cotton & polyester/viscose mixes, will dye to lighter shades
• Wool, silk, polyester, acrylic, nylon & fabrics with special finishes, e.g. ‘dry-clean only’, cannot be dyed

2. FABRIC AMOUNT:

• Up to 500g fabric (e.g. 1 pair jeans) will dye to the full shade
• A maximum of 1kg can be dyed, to lighter shades

3. FABRIC COLOUR:

• Colour mixing rules apply, e.g. black dye on red fabric gives burgundy. Patterned fabric will often still show through

HELPFUL HINTS
• Only dye up to 1kg fabric and always use whole pack, no more, no less
• Dyeing may not cover stains, faded areas or bleach marks
• After dyeing, wash separately for first few washes to remove any excess dye
• Should any dye be left in machine, add cup of household bleach to drum, add usual detergent & run machine empty on 40°C cycle
• Remember polyester stitching will not dye

Safety Information

Dylon Wash & Dye – Intense Black

DANGER

May cause allergy or asthma symptoms or breathing difficulties if inhaled.
May cause an allergic skin reaction.
Causes serious eye damage.
Causes skin irritation.
May be corrosive to metals.